Disk Drives and Files 65
E-EQ-MX2RG-L-ARC MX2 Reference Guide
PCM Directory Files
CNFIGNAM.EXE Specifies which PCM Plus configuration parameters are to be used,
based on the selected boot configuration.
PCM.INI Defines system resource requirements for all boot configurations which
contain PCM Plus. When a boot configuration is specified,
CNFIGNAM identifies the selection as CONFIG.SYS is loaded and
requests the relevant configuration information from the PCM.INI file.
PCMATA.SYS Device driver enables the system to access ATA-configured PC cards
as IDE hard drive devices using an IDE partition table.
PCMCS.EXE Must be loaded directly after Socket Services. Coordinates access to the
PC cards and allocates PC system resources among client drivers.
PCMSS400.EXE PCM socket services are located in this driver. The purpose of socket
services is to provide a layer of software support to the actual PC
hardware that controls PC-compatible sockets for PC cards.
Agent Directory Files
The SNMP agent files are loaded on MX2’s with a 2.4GHz radio.
Please refer to the “SNMP Agent Reference Guide” and “Client Configuration
Manager Reference Guide” for more details on the SNMP agent. Please refer to the
following section titled “Avalanche” when Avalanche is installed.
AGENT.EXE Diagnostic agent. Provides limited access to the LXE Private MIB.
CFGAGENT.EXE Configuration agent. Provides full access to the LXE Private MIB.
REV.BAT Displays current revision level.
RFPARSE.EXE Used by PCRFLIB to obtain configuration settings. May or may not be
present.
Terminal Emulation Files
Please refer to the specific Terminal Emulation’s reference guide for complete
instructions.
Some MX2’s do not have terminal emulation (TE) files and may or may not have a radio card.
When a need exists to convert the unit to a TE unit or a different radio card, contact LXE
Customer Services for assistance.
Following are the directory names containing the TE program files:
\APLUS ANSI Plus with 2.4 GHz radio
\IBM24 TN3270 with 2.4 GHz radio
\IBM24 TN5250 with 2.4 GHz radio
Note: Dual Terminal Emulation (Dual TE) is not supported on this device.
