Radio PC Card Configuration 29
E-EQ-MX2RG-L-ARC MX2 Reference Guide
Radio PC Card Configuration
Note: LXE will pre-install radio cards and drivers on MX2 RF units before delivery. These
instructions are included for those users who may need to reinstall radio drivers and
reconfigure radio parameters.
After installing the radio card, you must configure the MX2 to use the card. Please refer to the
appropriate section for your radio card in the remainder of this section.
Note: Symbol FHSS radios are obsolete (6/2005).
Introduction
Note: The information and programs in this section only pertain to LXE’s 2.4GHz system
radios. They do not work with LXE’s 900MHz system radios.
Change the radio parameters by editing the NET.CFG file in the PCTCP directory. This can be
done with any ASCII text editor or NED. The NET.CFG file is the configuration file used by the
radio card’s ODI driver. The NET.CFG file determines the wireless network name, the
workstation name and other information regarding the wireless system.
2.4GHz radio parameters cannot be changed using LXE’s terminal emulation (TE) configuration
utilities.
The Sockets software package provides an interface to all of the TCP/IP parameters. Parameter
configuration is performed by editing the file SOCKET.CFG.
