36 Radio PC Card Configuration
MX2 Reference Guide E-EQ-MX2RG-L-ARC
PowerSaveMode
PowerSaveMode "FASTPSP"
Fast Power Save Mode
MaxPowerSave
Maximum power save mode
MaxPowerSave "ON"
NodeName
Descriptive station name
NodeName " "
WEP enable
To enable WEP uncomment the following line and set the key with the wepdos.exe utility (Cisco
340 radios only)
authtype "wepopen"
Set WEP key in radio before wepopen using the WEPDOS program in the PCTCP directory.
Diversity
The diversity parameter must be set according to the number of antennas for each computer.
MX2 computers = 1 antenna, right port.
Diversity ”on” for 2 antennas
Diversity “left” for 1 antenna left port
Diversity “right” for 1 antenna right port
PortBase – IRQ – Memory -
Socket
The adapter needs 32 16-bit I/O ports, and 1 non-sharable IRQ. Any commented lines are
managed PCMCIA card & socket services and should not be changed or uncommented.
PortBase 100
;IRQ 5
Memory C0000
;Socket 0
BusType
PCMCIA interface is used on all LXE DOS computers.
BusType "PCMCIA"
Frame
Frame type of wired and wireless network.
(Default) Frame ETHERNET_II
Frame ETHERNET_802.3
Frame ETHERNET_802.2
