A SERVICE OF

logo

76
Chapter 4 Introduction
Serial Matrix Default Values and States
The factory settings for the Serial Matrix emulation menu options are shown in
Table 16. Table 17 lists additional factory settings for parameters provided by
the ASCII Emulation formatting menus. (The EMULATION menu options are
described in the
User's Guide
). Host control codes can override many of the
settings for these menu options.
Table 16. Serial Matrix Default Settings
Characteristic Default Setting
Control Code 06 8.0 LPI
Define CR Code CR = CR
Auto LF Enable
Overstrike Enable
Define LF Code LF = LF
Printer Select Disable
Alternate Set 80-9F Control Code
Character Sets
Primary Subset
Extended Subset
IBM PC
ASCII (USA)
Code Page 437