60
Chapter 3 Introduction
The emulation's response to several of the control codes depends on the
configuration. For example, upon receipt of the carriage return control code,
the emulation will either perform a carriage return function only, or a carriage
return and line feed, based on the configuration for the CR function.
P-Series XQ Default Values and States
The factory settings for the P-Series XQ emulation menu options are shown in
Table 12. Table 12 also lists additional factory settings for parameters
provided by the ASCII Emulation formatting menus. (The EMULATION menu
options are described in the
User’s Guide
). Host control codes can override
many of the settings for these menu options
Table 12. P-Series Default Settings
Characteristic Default Setting
Select CPI 10.0 CPI
Select LPI 6.0 LPI
Typeface Letter Gothic
Horizontal DPI 120 DPI
Vertical DPI 72 DPI
Prop. Spacing Enable
Italic Print Disable
Slashed Zero Disable
Left Margin 0 characters
Right Margin 0 characters
Top Margin 0 linespaces
Bottom Margin 0 linespaces
Print Char. Set
Define CR code CR = CR
Auto LF Disable
Define LF code LF = CR + LF
*Advanced User:
Control Code 06 8.0 LPI
Compressed Print Char 01 SOH
Bold Disable
Elong/Alt. Font Elng=BS Font=SO
