160
Chapter 6 Configuring the Epson FX-1050 Emulation with Control Codes
Bell
ASCII Code BEL
Hex Code 07
Dec Code 7
Purpose Sounds the printer's buzzer/beeper.
Comment The BEL function sounds the buzzer/beeper for 0.2 seconds
upon receipt of this command.
Cancel Line
ASCII Code CAN
Hex Code 18
Dec Code 24
Purpose Clears all unprinted data from a line, but does not affect control
codes.
Comment You can use this control code to delete a line, but do so with
caution to avoid possible misprinting. This control code cancels
the double wide attribute set by SO. No other print attributes are
affected. The logical print head goes to the print position it had
after the last CR or paper motion command.
Carriage Return
ASCII Code CR
Hex Code 0D
Dec Code 13
Purpose Prints the data in the buffer, then returns the logical print head to
the left margin.
Comment Subsequent data are emphasized. A line feed is appended if the
printer is configured from the operator panel for CR = CR + LF.
When CR = CR + LF, this code cancels all one-line-only
emphasis and font controls: double-wide from SO and ESC SO,
and unidirectional printing from ESC <.
