A SERVICE OF

logo

24
Chapter 2 Introduction
P-Series Default Values and States
The factory settings for the P-Series emulation menu options (for an 8”
printer) are shown in Table 1. Table 1 also lists additional factory settings for
parameters provided by the ASCII Emulation formatting menus. (The
EMULATION menu options are described in the
User's Guide
). Host control
codes can override many of the settings for these menu options.
Table 1. P-Series Default Settings
Characteristic Default Setting
Select CPI 10.0 CPI
Select LPI 6.0 LPI
Typeface Letter Gothic
Character Group Standard Sets
Character Set IBM PC
Primary Subset ASCII (USA)
Extended Subset Code Page 437
Horizontal DPI 120 DPI
Vertical DPI 72 DPI
Prop. Spacing Enable
Italic Print Disable
Slashed Zero Disable
Left Margin 0 characters
Right Margin 0 characters
Top Margin 0 linespaces
Bottom Margin 0 linespaces
Print Char. Set
Define CR code CR = CR
Auto LF Disable
Define LF code LF = CR + LF
*Advanced User:
Control Code 06 8.0 LPI
Control Code 08 Elongated
Bold Disable