142
Chapter 5 Configuring the Proprinter III XL Emulation with Control Codes
Select Attributes
ASCII Code ESC [ @
n1
NUL NUL NUL
n2 n3
Hex Code 1B 5B 40
n1
00 00 00
n2 n3
Dec Code 27 91 64
n1
000
n2 n3
Purpose Selects double height and double width attributes as well as
either single or double height line spacing.
where:
n1
can take on the following characteristics:
where:
n2
can take on the following characteristics:
where:
n3
can take on the following characteristics:
Table 30. Select Attributes
n1
Values
n1
(Hex) Function
03 Set character height and line feed settings according to
the value of
n2
.(If
n1
= 03, there is no
n3
).
04 Set character height, line feed, and character settings
according to the values of
n2
and
n3
.
Table 31. Select Attributes
n2
Values
n2
(Hex) Function
00 No change
01 Set single height characters
02 Set double height characters
10 Set single line spacing
11 Set single height characters and single line spacing
12 Set double height characters and single line spacing
20 Set double line spacing
21 Set single height characters and double line spacing
22 Set double height characters and double line spacing
Table 32. Select Attributes
n3
Values
n3
(Hex) Function
00 No change
01 Set single width characters
02 Set double width characters
