6. WEB FUNCTIONS
6-37
Change priority of IP filter screen
Protocol Select protocol (ALL, ICMP, Any, TCP/UDP).
• Select protocol (ALL, ICMP, Any, TCP/UDP).
• If [Protocol] is [Any], enter the protocol number (1-
255).
• If [Protocol] is [TCP/UDP] only, select TCP/UDP,
TCP, UDP from list box. Enter port no. (range: 0-
65535).
Add button Register entered information. The IP filter setting
screen appears.
Save button Save entered information. The IP filter setting screen
appears.
Cancel button Restore previous settings and return to the IP filter set-
ting screen.
Item Description
Raise priority. (Right button: inoperative)
Lower priority. (Right button: inoperative)
Apply button Save entered information. Return to the IP filter setting
screen.
Cancel button Restore previous IP filter settings and return to the IP filter
setting screen.
Item Description
