Whirlpool GHW9200L Washer User Manual


 
6 - 7
Potential Causes
If too much detergent was used, run the unit through a Rinse/ Spin cycle then a
Normal cycle without adding any detergent. This should clear the unit of the
excess detergent.
Check the drain hose and make sure it is not plugged or kinked
Check Wire Harness connections to the Drain Pump, Pressure Switch, and
Central Control Unit (CCU)
Check/ Clean Drain Pump Filter of foreign objects
Check Drain Pump
Check the Pressure Switch
Check CCU
Door Lock Error
A Door Lock Error occurs if the door cannot be locked. It will try to lock it 6 times
before displaying the error.
Potential Causes
Door Lock Mechanism broken or removed from the Door
Check Door Lock/Switch Assembly
Check the wire harness connections to the Door Lock/Switch Assembly and
Central Control Unit (CCU)
Door Lock/Switch Assembly Failure
Door Unlock Error
A Door Unlock Error occurs if the door cannot be unlocked. It will try to unlock the
door 6 times before displaying the error.
Potential Causes
Door Lock Mechanism broken.
Check Door Lock/Switch Assembly for foreign objects
Check Wire Harness connections to the Door Lock/Switch Assembly and Central
Control Unit (CCU)
Door Lock/Switch Assembly Failure
Note:
The Door Lock/Switch Assembly can be manually unlocked. See Section
Seven, TECH TIPS
ERROR CODES
DISPLAY EXPLANATION AND RECOMMENDED PROCEDURE
F/dL
F/dU