Filter
Top Products
B–26 16026502 ©2005 Maytag Services
7
Using the Controls – 4 Speed
Select Models
Select Water Level
Determine the selected setting based on clothes load
size. Selection should provide sufficient water to permit
clothes to circulate freely during agitation. On select
models, the Infinite Water Level control allows you to
select a specific setting or anywhere in between.
It may become necessary, due to bulky fabrics, to
adjust the water level after agitation begins. To adjust
the water level, turn the control to reset and then back
to the desired setting.
STEP 1
Note: Items must circulate freely for best results.
Select Wash/Rinse Temperature
Your washer gives you a choice of hot, warm or cold
water for washing and cold or warm water (select
models) for rinsing.
Automatic Temperature Control (A.T.C.) (select
models) provides the optimal wash water temperature
for cleaning. To save energy, this washer will regulate
wash water temperatures by mixing hot and cold water
to reach the proper water temperature.
STEP 2
WATER LEVEL SETTING LOAD SIZE
Mini
1/4 Full
Small 1/4 - 1/3
Medium 1/3 – 1/2
Large 1/2 – 2/3
Super 3/4 – Full
Regular
Sturdy fabrics needing maximum
Normal/Fast
water extraction like jeans, towels
and bedding
Wrinkle Control
Sturdy fabrics needing a slower spin
Normal/Slow
speed to reduce wrinkling, such as
dress shirts and dress pants
Delicate
Delicate fabrics needing slower spin
Gentle/Slow
speed because of clothing
construction
Handwash
Intermittent slow agitation and soak
Ex. Gentle/Slow
to gently wash the most delicate items
Select Wash/Spin Speed
Your washer has selectable wash and spin speed
combinations.
STEP 3
Note: In wash water temperatures below 60
°
F,
detergents do not dissolve well or clean well.
WASH/SPIN LOAD TYPE
SPEED
Hot/Cold
White and heavily soiled, color-fast
items.
Warm/Warm Moderately soiled, colored items.
(select models)
Warm/Cold
Moderately soiled, colored items;
most wrinkle-free items.
Cold/Cold
Brightly colored, lightly soiled
items; washable woolens.
WASH/RINSE LOAD TYPE
TEMPS
These settings feature Automatic
Temperature Control:
ATC Hot/Cold,
Saves energy by adding cold water
ATC Warm/Cold
to the hot water from your water
heater. Provides optimum cleaning
at lower temperatures.
May add hot water to the incoming
ATC Cold/Cold
cold water as the washer fills. This
assures that the water will be warm
enough to properly activate detergent.
WASH/RINSE LOAD TYPE
TEMPS
ATC Warm/Warm