Filter
Top Products
WARNI NG
!
To avoid risk of electrical shock, personal injury or death,
disconnect power to unit before servicing.
Disassembly Procedures
24 16026502 ©2005 Maytag Services
9. Remove four screws retaining Spinner (Inner Tub).
10.After Spinner (Inner Tub) is removed, use Spanner
Wrench and Seal Nut tool to remove Seal Nut.
11.Remove gasket from Hub.
12.Use Spanner Wrench to remove Hub.
13.Remove Pressure Switch Hose from fitting on Outer
Tub.
14.Remove Suspension Springs using the spring
removal tool. Be careful not to let Tub and
Transmission assembly tip over.