Filter
Top Products
WARNI NG
!
Disassembly Procedures
To avoid risk of electrical shock, personal injury or death,
disconnect power to unit before servicing.
©2005 Maytag Services 16026502 19
8. Remove Pressure Switch Hose and wiring connector
from Pressure Switch.
9. Lift Pressure Switch locking tab and rotate switch to
remove.
10.Remove Facia from Console.
Drain Pump/Belt Removal
1. Disconnect power supply to unit.
2. Remove back Cover.
3. Remove Drain Hose Clamps.
NOTE: There will be water remaining in the hose from
the last cycle.
NOTE: There will be water remaining in the hose from
the last cycle.
4. Remove Belt.
5. Remove three screws retaining Drain Pump.