Filter
Top Products
B–24 16026502 ©2005 Maytag Services
These settings feature Automatic
Temperature Control:
ATC Hot/Cold,
Saves energy by adding cold water
ATC Warm/Cold
to the hot water from your water
heater. Provides optimum cleaning
(select models) at lower temperatures.
May add hot water to the incoming
ATC Cold/Cold
cold water as the washer fills. This
assures that the water will be warm
enough to properly activate
detergent.
Hot/Cold
White and heavily soiled, color-fast
items.
Warm/Warm Moderately soiled, colored items.
(select models)
Warm/Cold
Moderately soiled, colored items;
most wrinkle-free items.
Cold/Cold
Brightly colored, lightly soiled
items; washable woolens.
Using the Controls – 3 Speed
Select Models
Select Water Level
Determine the selected setting based on clothes load
size. Selection should provide sufficient water to permit
clothes to circulate freely during agitation.
It may become necessary, due to bulky fabrics, to
adjust the water level after agitation begins. To adjust
the water level, turn the control to reset and then back
to the desired setting.
Select Wash/Rinse Temperature
Your washer gives you a choice of hot, warm or cold
water for washing and cold or warm water (select
models) for rinsing. Use the chart below as a guide.
STEP 1
STEP 2
WATER LEVEL SETTING LOAD SIZE
Mini
1/4 Full
Small 1/4 - 1/3
Medium 1/3 – 1/2
Large 1/2 – 2/3
Super 3/4 – Full
Note: Items must circulate freely for best results.
Note: In wash water temperatures below 60
°
F,
detergents do not dissolve well or clean well. Care
labels define cold water as up to 85
°
F.
WASH/RINSE LOAD TYPE
TEMPS
5
Automatic Temperature Control (A.T.C.)
(select models) provides the optimal wash water
temperatures for cleaning. To save energy, the
Automatic Temperature Control will regulate wash
water temperatures by mixing hot and cold water to
reach the proper water temperature.
WASH/RINSE LOAD TYPE
TEMPS
ATC Warm/Warm