Filter
Top Products
Example 2:
^
Drill the numbered holes and the
screw points for the inner door panel
to the specified depth.
On chipboard fronts: inject silicone
sealant (supplied) into the (= Ø 10
mm) free holes.
Note that some different holes are re
-
quired for left or right hand hingeing.
Left hand hingeing:
left drawing (see template), holes 1, 2,
3, 4, 5, 7, 8
Right hand hingeing:
right drawing (see template), holes 1, 2,
4, 5, 6, 7, 8
^ Unscrew the lower screws on the top
hinges on both the left and right hand
sides of the door, (see illustration).
^ Screw the front panel on through the
drilled holes 1 and 2 on the inner
door panel (see template) - do not
over-tighten (screws are supplied).
^ Align the front panel.
^
Tighten the screws.
^
Drill any more holes required through
the drill holes in the door inner panel.
^
Securely fit the front panel with the re
-
maining screws provided and the
hinge screws.
Installation
58