Filter
Top Products
The programme does not start.
What to do if ... Possible cause Remedy
The Anti-crease / Fin
-
ish indicator light is
not on.
There is no power.
Check that
–
the door is properly closed.
–
the mains plug is plugged in.
–
the fuse or circuit breaker has
not tripped.
The programme does
not start when Spin
has been selected.
The washing ma
-
chine has not been
prepared for using
for the first time.
Prepare the machine as de
-
scribed in "Before using for the
first time".
The "Locked" check
light is flashing.
The lock function is
switched on.
Switch the lock function off.
At the end of one
programme you can-
not start the next
programme.
The programme se-
lector has not been
turned past the
"Finish" postion.
Turn the programme selector to
the "Finish" postion and then to
the programme you want to run.
Problem solving guide
43