Filter
Top Products
Programme . . .
. . . interruption
^
Press the "I-ON/0-OFF" button.
^
To continue with the same
programme press the"I-ON/0-OFF"
button again.
. . . alteration
The machine will accept the following
changes after the "Start" button has
been pressed.
– selection of a different temperature,
extra selection or de-selection of the
"Water plus", and "Quick wash" op-
tions can be carried out up to 6 min-
utes after start.
– the spin speed for final spin can be
changed within the limits for the
programme.
After start it is no longer possible to se-
lect a different programme.
If a different programme or 6 minutes
after start another temperature is se
-
lected, the indicator light "Anti-
crease/Finish" flashes. This does not af
-
fect the programme sequence. The in
-
dicator light goes out when the
programme selector is set back to the
programme or temperature previously
chosen.
To select a different programme pro
-
ceed as follows:
^
With the "I-On/0-Off" button switch off
the appliance.
^
Turn the programme selector to "Fin
-
ish".
^
Switch the machine on with the "I-
On/0-Off" button.
^
Select a new programme.
^
Press the "START" button.
. . . Skipping a programme stage
^ Turn the programme selector to "Fin-
ish".
As soon as the programme sequence
light starts flashing for the stage at
which the programme should continue:
^ Turn the programme selector switch
to the appropriate programme within
4 seconds.
When programme locking has been
activated the programme cannot be
changed or a programme stage left
out.
How to wash correctly
18