Filter
Top Products
Building under
This washing machine is specially de
-
signed for installation under a continu
-
ous worktop.
This machine is fitted with a protective
coverplate which replaces the machine
lid.
,
For reasons of electrical safety
this coverplate is necessary, and
must not be removed.
Please note the following:
–
The machine should never be oper
-
ated without the front panel firmly in
place.
–
The electrical and water connection
points should be close to the ma
-
chine and easily accessible.
– The skids provided with the machine
are intended to prevent damage to
floor coverings when manoeuvring it
into position.
Installation under a work surface 900 to
910 mm or 950 to 960 mm from the
floor, requires one or two raising kit(s)
respectively, available with fitting in-
structions from Miele dealers and the
Miele Spare Parts dept.
Installation
55