Filter
Top Products
The wash programme stops and a fault indicator light comes
on.
What to do if ... Possible cause Remedy
The buzzer sounds and
the Check drain light is
flashing.
The water outlet is
blocked.
Clean the fluff (drain) filter
and drain pump.
The drain hose has
been fixed too high.
The maximum drain height
is 1 m.
The buzzer sounds and
the Check inlet light is
flashing.
The water inlet is
blocked
–
Open the stopcock.
–
Start the programme
again.
The buzzer sounds and
the Check inlet and
Check drain lights flash.
The Waterproof system
has reacted.
Call the Service Depart-
ment.
One of the following in-
dicator lights is flashing
and the buzzer is
sounding.
– "Soak/Pre-wash"
– "Main wash"
– "Rinses"
–
"Rinse hold"
There is a fault. – Start the programme
again.
– If the check lights flash
again, contact the Service
Department.
Three horizontal bars
"- - -" appear in the dis
-
play and the buzzer is
sounding.
There is a fault.
–
Start the programme
again.
–
If the three horizontal bars
"- - -" appear again, call
the Service Department.
Problem solving guide
44