Filter
Top Products
Programming and storing in
memory
The programmable functions are acti
-
vated using the additional option but
-
tons and the programme selector in
special combinations, which intro
-
duce extra features not marked up on
the control panel.
Programming is carried out in four
steps:
1. Select programming mode
2. Select programmable function
3. Activate or deactivate programmable
function
4. Store the programmable function in
memory
1. Selecting programming mode
AThe machine must be switched off
and the drum door closed. The
programme selector must point to
"Finish".
BPress the additional option buttons
"Soak" and "Pre-wash" at the same
time and hold pressed in and:. . .
C. . . switch the machine on with the "I-
ON/0-OFF"-button.
DRelease all these buttons.
P 0 appears in the "time" display.
2. Selecting a programmable function
EFor the programmable function re
-
quired turn the programme selector
to the setting given:
–
for P1 High Water level
to - MIXED WASH Poly/Cottons -
–
for P2 Water plus system
to - Separate rinse -
–
for P4 activate i compartment
to - Spin -
–
for P9 Gentle action
to - WOOLLENS 40°C -
– for P10 Activate top-up rinse for
COTTONS wash
to - DELICATES cold -
– for P11 Memory Function
to - DELICATES 30°C -
FIn the Display the P now flashes al-
ternating with the number of the pro-
grammable function
e.g. P...1...P...1
The following also appears on the right:
0 = Programmable function is
not active
1 = Programmable function
is active
with P 2, a 2 appears on the right = Op
-
tion 2 is active.
Programmable functions
35