Filter
Top Products
33
Whirlpool Cabrio and Maytag Bravos Dryers
Beeping Before End-of-Cycle
Complaint:
Nuisance beeping during cycle, or before end-of-cycle, but not at end-of-cycle. This is NOT
Wrinkle Shield tone related.
Resoluon:
To stop beeping during cycle, simply turn the Damp Dry Signal to “O”. Damp Dry beeps when
clothes are 80% dry. This info is in the Use and Care Guide.
Why Use Damp Dry:
Select the Damp Dry Signal to alert you that your clothes are approximately 80% dry. This
useful when you want to remove lightweight items in a mixed load to avoid over-drying or
remove parally dry items that may need ironing.
The Damp Dry Signal is useful when drying bed sheets/linens in a mixed load. When the signal
goes o, open the door to stop the dryer, rearrange the load inside the dryer, close the door
and restart the dryer to nish the drying cycle. Rearranging the load will aid in the dying
process.
NOTE: The Damp Dry Signal is available only with the Automac Cycles.
Damp Dry Signal
Buon
Fabric Care Product Updates