Filter
Top Products
31
Fabric Care Product Updates
VMW Belt Drive Top Load Washers
Washer squeaks/squeals during agitaon or spin
Complaint:
VMW washer squeaks/squeals during
agitaon and/or spin.
Cause:
This is not suspension related. The seals on
the gear case were not lubricated properly at
the factory.
Resoluon:
1. Drop gear case.
2. Gently pull seal back and apply grease
into area under lip of seal between the
spin tube and gear case (Figure 1).
3. Also, gently pull seal back and apply
grease into area under lip of seal between
the agitator sha and spin tube (Figure 2).
4. Remove (wipe-o) any excess grease
from outside of seals.
Grease Part Number: 8182693
Retest:
If noise connues, replace complete gear
case.
Figure 1
Figure 2