Filter
Top Products
30
Fabric Care Product Updates
Classic Direct Drive Top Load Washers
Splashing During Wash/Rinse Cycle
Complaint:
Splashing during wash/rinse cycle.
Resoluon:
Increase load size. Wash and Rinse water levels are approximately 7”. The user can adjust the
Wash water level; however, the Rinse level is not user adjustable.
Adjust Rinse pressure switch to
increase rinse water level.
1. Unplug or disconnect power.
2. Remove control panel.
3. Remove rinse pressure switch (the
switch without the sha). Turn switch
90° to disengage from panel.
4. Using needle nose pliers, turn sha
on rinse switch CW unl it clicks. This
doubles the rinse level from 7” to
~14”.
5. Replace all parts and panels.
6. Plug in washer or reconnect power.
Rinse Level Switch
Wash Level Switch
(User Controlled)
90° Twist Lock