Filter
Top Products
38 INSTALLATION AND MAINTENANCE MANUAL PUBLICATION DATE 03/02 504 766
8. PUTTING THE MACHINE OUT OF SERVICE
If the machine is out of service, possibly replaced, follow the instructions.
8.1. DISCONNECTING THE MACHINE
1. Switch off the external electric power inlet to the machine.
2. Turn off the main switch on the machine rear.
3. Shut the external water or steam inlet to the machine.
4. Make sure that the external electric power steam inlets are shut off. Disconnect all electric, water or steam inlets.
5. Insulate the external electric power inlet conductors.
6. Equip the machine with a sign „Out of service“.
7. Unscrew nuts (bolts) fixing the machine to the floor.
8. During transportation follow the instructions stated in chapters „2. Warnings and symbols“, paragraphs
„Transportation and storage“ and chapter „4.1. Handling, transportation and storage“.
In case the machine will never be used again, dismantle carefully the door with the hinge (chapter 5.12.).
BE CAREFUL, FALLING DOOR AND GLASS CAN CAUSE INJURIES!
8.2. MACHINE LIQUIDATION
For the machine liquidation after finishing its usage period, respect the following instructions :
8.2.1. POSSIBILITY OF THE MACHINE LIQUIDATION BY THE SPECIALIZED COMPANY
Machine liquidation is executed by the competent company which respects material sorting and conditions
for the waste liquidation.
8.2.2. POSSIBILITY OF THE MACHINE LIQUIDATION BY OWN POTENTIAL
It is necessary to divide material into the following groups :
1. Plates of printed circuits incl. LCD ...........................................................waste group 160215
2. Electrolytic capacitors..............................................................................waste group 160215
3. Cabling ...................................................................................................waste group 160216
4. Other electrical components; motor, frequency converter,
contactors, heating elements...................................................................waste group 160216
5. Plastics...................................................................................................waste group 191204
6. Rubber....................................................................................................waste group 191204
7. Metal.......................................................................................................waste group 160117
8. Hubs with bearings..................................................................................waste group 170410
Offer the sorted waste to the company which is competent for further treatment.
REMARKS: