Filter
Top Products
26 INSTALLATION AND MAINTENANCE MANUAL PUBLICATION DATE 03/02 504 766
Side view Front view
1. Front face of the drum
2. Limiter
3. Rubber bushing
4. Switchboard bottom
5. Vibration switch
6. Adjusting nut
7. Vibration switch holder
Fig.5.6.
5.7. TIGHTENING MOMENTS
WARNING !
REGULARLY, ONCE IN THREE MONTHS OR EVERY 500 WORKING HOURS (WHICH EVER COMES
FIRST) INSPECT THE TIGHTNESS OF THE BOLTS !
If anyone of the bolts has been damaged, exchange it with the bolt of the same strength value marked on its
head. The best way is to order the original part according the „Spare parts manual“.
WARNING !
REPLACE THE DAMAGED BOLT WITH A ONE OF THE SAME STRENGTH VALUE MARKED ON ITS
HEAD! IGNORING OF THE BOLT QUALITY AND MECHANICAL STRENGTH CAN CAUSE SERIOUS
BODILY INJURIES !
Tighten the loosened bolts using the torque value stated in the following table:
Tightening Moments values of bolts and nuts for 22 kg / 50 lbs machine (fig. 5.7. A)
Bolt (nut) Dimension Number of pcs.
Tightening Moments
(Nm)
Tightening Moments
(lbf.ft)
A
M12 x 40 16 78,00 58,00
B
M 8 x 40 24 11,00 8,10
C
M12 x 35 3 36,00 27,00
D
M 8 x 30 12 11,00 8,10
E
M10 x 30 10 20,00 15,00
F
M12 x 35 2 36,00 27,00
G
nut KM13 1 420,00 310,00
Tab.5.7.A
Fig. 5.7. A Machines 22 kg / 50 lbs
!
!