Filter
Top Products
16
Windows XP Mouse Settings
Windows XP knows a setting named “improve mouse acceleration”, which has to be
deactivated.
Active Desktop
If the Active Desktop feature of Microsoft Windows is enabled do not use a plain
background. Instead, use some kind of wallpaper. As an alternative, you could also
disable the Active Desktop completely.
To check the settings, move the mouse pointer on your administration system to the upper
left corner of the Remote Console. Move the mouse pointer slightly forth and back, then. This
will synchronize the mouse. Once done, move the mouse pointer around and observe the
behavior of your remote mouse in accordance to the local one. If the mouse desynchronizes
quickly, one of the settings as mentioned above may not be correct.
4.1.3.5 Single and Double Mouse Mode
The information above applies to the Double Mouse Mode, where remote and local mouse
pointers are visible and need to by synchronize. The KVM-9000 also features another mode,
the Single Mouse Mode, where only the remote mouse pointer is visible. Activate this mode
in the open Remote Console and click into the window area. The local mouse pointer will be
hidden and the remote one can be controlled directly. To leave this mode, it is necessary to
define a mouse hotkey in the Remote Console Settings Panel. Press this key to free the
captured local mouse pointer.
4.1.3.6 Video Modes
The KVM-9000 recognizes a limited number of common video modes. When running X11 on
the host system, please do not use any custom mode lines with special video modes. If you
do, the KVM-9000 may not be able to detect them. We recommend using any of the standard
VESA video modes, instead