Filter
Top Products
9
Left Wing Extension Box (optional
accessory)
1 Left Wing Extension w/Miter Slot
1 Miter Gauge
1 Miter Gauge Bar
1 Miter Gauge Handle
1 Miter Gauge Fence
Hardware Bag
4 Socket Head Cap Screws M10x90
4 Lock Washers M10
4 Flat Washers M10
1 Hex Wrench 8mm
XACTA Fence II Homeshop 30/52
Box One:
1 XACTA Fence II
1 Lock Lever Knob
Box Two:
1 Front Rail
1 Back Rail
1 Guide Tube
2 Black Plastic End Caps
Hardware Bag consisting of:
Quantities for 30" and 52" Rails
Size Part 30" 52"
1/4-20 x 1-1/2 Hex Cap Screws 06 07
1/4-20 x 3/4 Hex Cap Screws 05 07
1/4 Flat Washer 19 23
1/4 Lock Washers 13 16
1/4 Hex Nuts 06 07
1/4-20 x 1/2 Hex Cap Screws 02 02
M8 x 16
Socket Head Cap
Screw
04 04
M8 Flat Washer 04 04
M8 Lock Washers 04 04
Notes: The hardware should be packed in the
guide rail along with the end caps.
The contents of the hardware bag (shown at right)
are drawn full scale.
Note 1: Quantities for items in the hardware bag
are for the 52" rail system. If you purchased the
30" rail system, there will be extra hardware.
Note 2: If the optional wooden extension table is
not used, there will be extra hardware.
Tools Required for Assembly
1 8mm Box Wrench
1 10mm Box Wrench
1 12mm Box Wrench
2 13mm Box Wrench
1 14mm Box Wrench
1 17mm Box Wrench
2 10mm Open End Wrenches
1 #2 Cross Point Screwdriver
1 #3 Cross Point Screwdriver
1 2.5mm Hex Wrench
1 3mm Hex Wrench
1 4mm Hex Wrench
1 5mm Hex Wrench
1 6mm Hex Wrench
1 Straight Edge
1 Combination Square
1 Combination Square & Straight Edge
1 Electric Drill
1 1/4”, 3/16, 5/16” Drill Bits
2 4”-6” C-Clamps
Metric Wrench Set or 6”-8” Adjustable Wrench
Metric Hex Wrench Set
Contents of Hardware Bag