Indesit PWSE61070S Washer User Manual


 
7
GB
Wash cycles and options
Table of programmes and wash cycles
Wash cycles
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Detergents
Max.
load (kg)
Cycle
duration
Pre-wash Main wash Bleach
Fabric
softener
Daily Programs
The duration of the wash cycles can be checked on the display.
1
Cottons with Pre-wash: extremely soiled whites. 90° 1000
-
6
2
White Cottons: extremely soiled whites. 90° 1000 -
6
2
White Cottons (1): heavily soiled whites and resistant colours. 60° 1000 -
6
2
White Cottons (1-2): heavily soiled whites and delicate colours. 40° 1000 -
6
3
Cottons: heavily soiled whites and resistant colours. 60° 1000 -
6
4
Coloured Cottons(3): lightly soiled whites and delicate colours. 40° 1000 -
6
5
Synthetics: heavily soiled resistant colours. 60° 800 -
2,5
6
Synthetics: lightly soiled resistant colours. 40° 800 -
2,5
7 Jeans
40° 800 -
-
2,5
8 Shirts
40° 600 -
2
9
Mix-Cool 30’: to refresh lightly soiled garments quickly (not sui-
table for wool, silk and clothes which require washing by hand).
Cold
water
800 -
-
3
Special cycles
10
Wool: for wool, cashmere, etc. 40° 600 -
-
1
11
Silk/Curtains: for garments in silk and viscose, lingerie. 30° 0 -
-
1
12 Sport Shoes
30° 600 -
-
Max.2
paires
13 Outwear
30° 400 -
- - 1,5
Partial cycles
Rinse - 1000 - -
6
Spin - 1000 - - - - 6
Drain - 0 - - - - 6
Wash options
The “PRIME” technology optimises energy, water and time
consumption according to the quantity of garments actually
inserted in the machine. Moreover, pressing the
button
allows for selecting the following options:
- Water: allows for reducing water consumption without
having to renounce impeccable results (recommended for
heavily soiled garments).
- Energy: automatically selected by “PRIME”, this option
reduces energy consumption (recommended for normally
soiled garments).
- Time: allows for reducing wash cycle duration
(recommended for lightly soiled garments).
! This may only be used in conjunction with wash cycles 1, 2, 3,
4, 5, 6 (all three levels) and 7, 8, 9 (
- Energy and - Time levels).
Extra Rinse
By selecting this option, the efficiency of the rinse is increased
and optimal detergent removal is guaranteed. It is particularly
useful for sensitive skin.
! It cannot be used in conjunction with wash cycles 9,
, .
Easy iron
By selecting this function, the wash and spin cycles will be modified
in order to reduce the formation of creases. At the end of the cycle
the washing machine will perform slow rotations of the drum, while
the EASY IRON and START/PAUSE indicator lights will flash (blue
and orange respectively).
To end the cycle, press the START/
PAUSE button or the EASY IRON button. For wash cycles
number 11-13, the machine will end the cycle while the laundry
is soaking; the EASY IRON and START/PAUSE indicator lights
will flash. To drain the water so that the laundry may be removed,
press the START/PAUSE button or the EASY IRON button.
! It cannot be used in conjunction with wash cycles 9, 10,
12,
, .
Stain removal
This function is particularly useful
for the removal of stubborn
stains. Insert extra compartment
4 (supplied with the appliance)
into compartment 1. When
pouring in the bleach, be careful
not to exceed the “max” level
marked on the central pivot
(see figure). To bleach laundry
with no other washing action,
pour the bleach into extra
compartment 4, select the “Rinse” cycle
and activate the
“Stain removal” option
. To bleach during a wash cycle, pour
in the detergent and any fabric softener you wish to use, select
the desired wash cycle and enable the “Stain removal”
option.
The use of extra compartment 4 excludes the pre-wash function.
! It cannot be used in conjunction with wash cycles 1, 7, 9,
10, 11, 12, 13,
, .
4
2
3
1
4
2
1
3
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as
water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
For all Test Institutes:
1) Test wash cycle in compliance with regulation 2010/1061: select wash cycle 2 with a temperature of 60°C and 40°C.
2) Long wash cycle for cottons: select wash cycle 2 with a temperature of 40.
3) Short wash cycle for cottons: select wash cycle 4 with a temperature of 40.
1) Test wash cycle in compliance with regulation EN 60456: select wash cycle 2 with a temperature of 60°C.
TRRUCH