Filter
Top Products
WFR 2460 Service Tips
WFR 2460 Service Tips
--
--
Test Program (10)
Test Program (10)
66
HINT: To save time with Test T18,
press Menu to stop testing after
the temperature has gone up
several degrees, confirming the
washer is heating OK.
NOTE: On Test T18, the water
level rises until N
H
, which is the
heating water level.
HINT: Start/Pause button light:
• Flashes red when tests can be selected or scrolled through.
•Stays red continually when tests are running.
•Stays yellow continually when drum is accelerating/running at max.
speed (during drum motor test) or has reached N
D
water level (~ n152
pressure switch reading -- when water is draining, yellow light turns red
~ n094 pressure switch reading).
• Flashes yellow when drum is slowing down from 1200 RPM max. speed
during drum motor test.
1st Edition/Revision 5 (1/20/04)