Filter
Top Products
Disassembly
Disassembly
--
--
Drum (4), Outer Drum (Tub)
Drum (4), Outer Drum (Tub)
31
1st Edition/Revision 5 (1/20/04)
HINT: Before disconnecting
wire harnesses from control
module, mark each one to
insure proper reassembly (as
several connectors look
identical).
HINT: To access wire harness
connectors to disassemble
them, separate control module
from fascia panel by carefully
prying back plastic clips
around the module.
HINT: After removing
crossbar screws,
remove crossbars by
rotating bottom of
them out from washer.
HINT: Loosen spring clamps and
disconnect hoses from dispenser.
HINT: Unscrew band
screws and remove band
from front counterweight.