Filter
Top Products
4
6
5
4
TO REMOVE FRONT PANEL (continued):
• f
Carefully loosen door seal clamping rings (outer/inner), taking care not to tear
seal. Loosen clamp and disconnect water fill tube from seal, then remove seal.
• g Remove two T-20 Torx front panel screws from bottom of front panel.
• h To remove front panel, carefully pull bottom of panel out away from washer.
• i Disconnect door latch connector.
4 4
Disassembly
Disassembly
--
--
Drum (2), Front Panel
Drum (2), Front Panel
29
HINT: When removing door
seal, loosen clamp to water fill
tube and disconnect tube from
door seal.
5 7
1st Edition/Revision 5 (1/20/04)