Filter
Top Products
Installation
51
F232135
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Supply Dispensing
(OPL Machines Only)
IMPORTANT: Undiluted chemical dripping can
damage the machine. All chemical injection supply
dispenser pumps and dispenser tubing should be
mounted below the washer’s injection point. Loops
do not prevent drips if these instructions are not
followed.
IMPORTANT: Failure to follow these instructions
could damage the machine and void the warranty.
Connection of External Liquid Supplies
18 – 80 Pound OPL Models
1. Facing the rear of the machine, locate the
1-1/2 inch (38 mm) opening found at the upper
right-hand side of the valve panel. Refer to
Figure 31.
Figure 31
2. Gather external supply hoses and pull through
opening.
3. Locate the 4 capped nozzles on the rear of the
liquid supply dispenser and remove caps. Refer
to Figure 32.
Supply Dispensing
18 – 80 125
Number of dry supply
compartments
30 or 5
(optional)
Number of liquid supply
connections (OPL only)
45
Liquid supply connection size 5/16
in.
(8 mm)
5/8 in.
(15.9 mm)
Dangerous Chemicals. May damage eyes
and skin. Wear eye and hand protection
when handling chemicals; always avoid
direct contact with raw chemicals. Read
the manufacturer’s directions for
accidental contact before handling
chemicals. Ensure an eye-rinse facility
and an emergency shower are within easy
reach. Check at regular intervals for
chemical leaks.
W363
WARNING
CHM2002N
1 External Supply Hose Opening
CHM2002N
1
C VALVE PANEL – REAR VIEW