Filter
Top Products
68 9001900
Section 4 Service Procedures
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
21 Auxiliary 1 0:05 N/A N/A
22 Auxiliary 2 0:05 N/A N/A
23 Auxiliary 3 0:05 N/A N/A
24 150°F Fill to
High Level
5:00 The water should reach 150°F and the
machine should fill to high level within 5
minutes and, when it does, a buzzer will
sound.
Refer to the “No Fill Analysis” flowchart.
25 Cold Fill to
Overflow
5:00 The machine should fill with cold water to
overflow within 5 minutes and, when it does,
a buzzer will sound.
Refer to the “Machine Did Not Fill Alarm
Analysis” flowchart.
26 Soak (150°F) 2h00 The machine should maintain a water
temperature of 150°F and a high fill level for
the time programmed.
If the machine doesn’t maintain a water
temperature of 150°F, check the
components used for the auxiliary heating
(e.g. steam valve or heating elements). If
the machine doesn’t maintain a high fill
level, refer to the “Machine Did Not Fill
Alarm Analysis” flowchart.
27 Drain 1 1:00 The machine should drain within 1 minute
and, when it does, a buzzer will sound.
Refer to the “Empty Alarm Analysis”
flowchart.
28 Spin 1 2:00 The machine should spin at 500 RPM’s for 2
minutes.
Refer to the “No Spin Analysis” flowchart.
29 Spin 2 2:00 The machine should spin at 650 RPM’s for 2
minutes.
Refer to the “No Spin Analysis” flowchart.
30 Spin 3 2:00 The machine should spin at the following
RPM’s for 2 minutes:
• 18, 25, 35, 55, 75, 100 and 135-pound
capacity models: 800 RPM’s
• 165-pound capacity models: 750 RPM’s
Refer to the “No Spin Analysis” flowchart.
31 Spin 4 2:00 The machine should spin at the following
RPM’s for 2 minutes:
• 18, 25, 35, 55, and 75-pound capacity
models: 1000 RPM’s
• 100 and 135-pound capacity models: 800
RPM’s
• 165-pound capacity models: 750 RPM’s
Refer to the “No Spin Analysis” flowchart.
32 Auxiliary 3 0:15 N/A N/A
33 Cold Fill to
Medium Level
5:00 The machine should fill with cold water to
medium level within 5 minutes and, when it
does, a buzzer will sound.
Refer to the “Machine Did Not Fill Alarm
Analysis” flowchart.
34 Wash 1 10/3
(80°F)
0:15 The basket should rotate forward 10 seconds,
pause for 3 seconds, rotate in reverse for 10
seconds, pause for 3 seconds, etc.
Refer to the “No Motor Operation (With or
With No AC Drive Fault” flowchart.
35 Drain 1 1:00 The machine should drain within 1 minute
and, when it does, a buzzer will sound.
Refer to the “Empty Alarm Analysis”
flowchart.
Cycle 39 — Test Program
(continued)
Step Description Min:sec Step Definition Corrective Action
Table 1
(continued)