Filter
Top Products
62 9001900
Section 3 Troubleshooting
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
16. NO KEYPAD BOARD FUNCTIONS
Does
the display
change, indicating
that the computer has
gone into the cycle that has
been selected (e.g., does
the “NEXT09” display
change to
“STEP 01 CYCLE09”
“HOT LOW”)?
YES
Press the
start button
on the keypad.
do you hear a
single beep?
NO
If the cycle starts on the
display but no functions
are taking place, go to the
“NO OUTPUT VOLTAGE TO
COMPONENTS” flowchart,
step 1.
If you hear either double
beeps or no beeps at all,
replace the keypad board.
NO
Replace the keypad board. If the
problem persists, contact Alliance
Laundry Systems’ customer service
department.
NO
YES
YES
CFD1987S
With the
display reading
“CYCLE00,” select a
two-digit cycle (e.g.,
enter “0” and “9” for
cycle “09”). Does the
keypad react with a
single beep and by
changing the display
to “CYCLE09”?