Filter
Top Products
52 9001900
Section 3 Troubleshooting
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
13. MACHINE DID NOT FILL ALARM ANALYSIS
CFD1989S
1
Is there water coming in
through the water supply
lines?
IS
there voltage
(220 Volts) at the
respective water
valve that should
be turning
on?
Check the main water valve
shut-offs, inside of the
water hoses and in-line
strainers.
NO
YES
Replace the water valve.
YES
Is
there
continuity
between the wire
from the main
board to the
water valve?
2
NO
Replace the main board.
YES
Is
there voltage (220
Volts) between the
drain wires on the main
board?
For example, for the
cold fill valve, is there
voltage between the
gray (cold fill) and blue
(common) wire?
3
4
NO
Replace the water valve.
YES
Is
the water plug
harness
connector on the
main board
intact?
NO
Replace the main board.
Replace the water valve
wiring harness.
YES
NO