Filter
Top Products
504524
13
STEP 5:
Wipe Out Inside Of Each Dryer
Before using dryer for the first time, use an all-purpose
cleaner, or a detergent and water solution, and a damp
cloth to remove shipping dust from inside dryer drum.
STEP 6:
Plug in the Dryer Unit
Refer to Section on Electrical Requirements, and
connect the dryer to an electrical power source.
STEP 7:
Check Installation
Refer to Installer Check on the back cover of this manual
and make sure that dryer is installed correctly.
D340IE2A
D275IE0F
ELECTRIC
Connect each unit to 30 Amp
circuit.
D254IE0D
GAS
Plug each cord into separately
fused 15 Amp circuit.