Settings You Can Change with User Tools
145
6
General Features P.
5
/
6
❖
❖❖
❖ Document Server Print Key: F
You can assign frequently used
functions to function keys F1 to F5.
You can also change assigned
functions.
Note
❒ Default:
• Document Server Print Key:
F1: 2 Sided Top to Top
• Document Server Print Key:
F2: 2 Sided Top to Bottom
• Document Server Print Key:
F3: Booklet
• Document Server Print Key:
F4: Magazine
• Document Server Print Key:
F5: Off
General Features P.
6
/
6
❖
❖❖
❖ Clear Bypass Mode
You can set whether to “Clear” or
“Do not Clear” bypass tray set-
tings when the machine is turned
on, reset, or modes are cleared.
Note
❒ Default: Clear
❖
❖❖
❖ Colour Mode Priority
You can select to prioritize “Auto
Colour Select”, “Full Colour”, or
“Black & White” when the ma-
chine is turned on, reset, or modes
are cleared.
Note
❒ Default: Black & White
❖
❖❖
❖ Two-colour Mode Priority
You can set whether to prioritize
“Red & Black” or “Two-colour” in
Two-colour mode.
Note
❒ Default: Red & Black
❖
❖❖
❖ Auto Image Density Priority
You can set whether Auto Image
Density is “On” or “Off” when the
machine is turned on, reset, or
modes are cleared.
Note
❒ Default:
• Full Colour/Two-colour: Off
• B&W/Single Colour: On
❒ When using the Auto Colour
Select function, the settings of
Full Colour/Two-colour will be
effective.
Reproduction Ratio P.
1
/
2
❖
❖❖
❖ Shortcut R / E
You can register up to three fre-
quently used Reduce / Enlarge ra-
tios other than the fixed Reduce /
Enlarge ratio and have them
shown on the initial display. You
can also change registered Reduce
/ Enlarge ratios.
If no Reduce / Enlarge ratio has
been set when selecting [Shortcut R
/ E 1], [Shortcut R / E 2], or [Shortcut R
/ E 3], enter the ratio using the
number keys.
VenusC1_GB_Copy_F1_FM.book Page 145 Tuesday, January 17, 2006 3:43 PM
