Troubleshooting
126
5
Display During Connect Copy
This tray is una-
vailable because
the sub-machine
does not have the
same paper set-
ting(s).
Paper tray settings on the
two machines do not
match.
Make the same settings on both ma-
chines.
No stamp data in
the sub-machine.
The stamp data on the sub-
machine has been deleted.
Program the stamp again on the
sub-machine.
Cannot print from
the sub-machine.
Sub-machine will
be disconnected.
Sub-machine has stopped
because of a power failure
or communication error.
Continue copying using the main
machine.
Problem Causes Solutions
[] is not dis-
played.
The main power of the sub-
machine is off.
Turn the main power of the sub-ma-
chine on.
Functions that cannot be
used with Connect Copy
are selected on the main
machine (such as storing or
copying the first page of a
document in the Document
Server).
Cancel the functions selected on the
main machine.
The main machine is in In-
terrupt mode.
Press the {
{{
{Interrupt}
}}
} key on the sub-
machine to exit Interrupt mode.
The Connect Copy Key
Display setting is Off.
Select [On] for the Connect Copy
Key Display setting.
The cable connecting the
two machines is damaged.
Contact your service representative.
The L
LL
L is lit. Follow the instructions displayed.
[] appears faded.
Functions that cannot be
used with Connect Copy
have been set.
Press the {
{{
{Clear Modes}
}}
} key to clear
the settings.
Message Causes Solutions
VenusC1_GB_Copy_F1_FM.book Page 126 Tuesday, January 17, 2006 3:43 PM
