Monitoring and Analyzing Switch Operation
Status and Counters Data
CLI Access to System Information
The show system command displays general system information about the
switch.
Syntax: show system [chassislocate| information | power-supply | temperature |
fans]
Displays global system information and operational
parameters for the switch.
chassislocate
Displays the chassisLocator LED status. Possible values
are ON, Off, or Blink. When the status is On or Blink, the
number of minutes that the Locator LED will continue to
be on or to blink is displayed.
information
Displays global system information and operational
parameters for the switch.
power-supply
Shows chassis power supply and settings.
temperature
Shows system temperature and settings.
fans
Shows system fan status.
ProCurve(config)# show system chassislocate
Chassis Locator LED: ON 5 minutes 5 seconds
ProCurve(config)# show system chassislocate
Chassis Locator LED: BLINK 10 minutes 6 seconds
ProCurve(config)# show system chassislocate
Chassis Locator LED: OFF
Figure B-3. Example of Command Results for show system chassislocate
Command
B-8
