Redundancy (Switches 8200zl)
Event Log Messages
Event Log Messages
# System Message Severity Description
1 Mgmt module [1 or 2] went down
without saving crash information
info The specified management module went down
without saving the crash information.
RMON_BOOT_NO_CRASH_RECORD
2 Mgmt module [1 or 2] went down info The specified management module was rebooted.
RMON_BOOT_CRASH_RECORD0
4 Boot-up selftest failed fatal The boot up selftest of the management module
failed. This message also appears for an interface
module that fails selftest.
RMON_BOOT_SELFTEST_FAILURE
5 System booted
or
Mgmt Module [1 or 2] Booted
info This message appears at the end of the boot
process.
RMON_BOOT_COMPLETE
8 Mgmt Module [1 or 2] Active info The specified management module is the active
management module
RMON_SYSTEM_MGMT_MOD_ACTIVE
9 Mgmt Module [1 or 2] in Standby Mode info The specified management module is in standby
mode.
RMON_SYSTEM_MGMT_MOD_STANDBY
11 Mgmt Module [1 or 2] Offline
(redundancy disabled)
info The no redundancy management-module
command was issued and the specified
management module went offline.
RMON_SYSTEM_MGMT_OFFLINE
12 Mgmt Module [1 or 2] Failed Selftest warn The specified management module failed selftest
and will not become an active or standby module.
RMON_SYSTEM_MGMT_FAILED
13 Lost Communication with Mgmt Module
[1 or 2]
warn A management module failed to receive heartbeats
from the other management module.
RMON_SYSTEM_MGMT_LOST_COMM
14 Resetting Mgmt Module [1 or 2] info The specified management module is being reset.
This can occur if the MM Reset button is pressed.
RMON_SYSTEM_MGMT_RESET
15-46
