Time Protocols
SNTP: Viewing, Selecting, and Configuring
If include-credentials is configured, the SNTP authentication configuration is
saved in the configuration file. When the show config command is entered, all
of the information that has been configured for SNTP authentication displays,
including the key-values.
ProCurve(config)# show config
Startup configuration:
.
.
.
include-credentials
timesync sntp
sntp broadcast
sntp 50
All of the SNTP authentication
information displays in the
configuration file, including the key-
values.
sntp authentication
sntp authentication key-id 55 authentication-mode md5 key-value “secretkey1”
trusted
sntp authentication key-id 2 authentication-mode md5 key-value “secretkey2”
sntp server priority 1 10.10.10.2 3 key-id 55
sntp server priority 2 fe80::200:24ff:fec8:4ca8 4 key-id 55
sntp server priority 3 10.10.4.60 3
.
.
.
Include-credentials is configured.
Figure 9-19. Example of Saved SNTP Authentication Information when include-credentials is Configured
9-25
