198 DX-700 • User’s Guide • Rev 02
_K==oÉãçíÉ=`çåíêçä=mêçíçÅçä
DX-700 Remote Command List
• Query format: FIBERRTIME? | Bank | Out | Index | Type
~ Bank: Bank ID 1 – 3
~ Out: Output ID 1 – 6
~ Index: Fiberlink index (starts from 1; 0 is not supported)
~ Type: Fiberlink type (0 = Fiberlink Tx; 1 = Fiberlink Rx)
• Query returns: Runtime
S Example: FIBERRTIME? | 2 | 1 | 1 | 0
1378
jçåáíçê=lìíéìí=`çãã~åÇë
jlobp
• Description: Set / Query the Monitor Output Resolution. With the string
parameter, DX-700 will use the string and try to match it to the standard format list.
Note that the system will always ignore interlaced formats as interlaced formats
are not allowed.
• Set format: MORES | Format
• Parameters:
~ Format: Format string (refer to VFSTDLIST cmd for valid format strings)
S Example: MORES | 1600x1200 @60
• Query format: MORES?
• Query returns: Format
~ Format: Format string (refer to VFSTDLIST cmd for valid format strings)
S Example: MORES?
1600x1200 @60
jp^sb
• Description: Save Monitor Output Setting
• Set format: MSAVE
• Parameters: n/a
• Example: MSAVE
• Query format: n/a
jl_^kh
• Description: Set / Query the current Bank that Monitor Output is displaying.
• Set format: MOBANK | Bank
• Parameters:
~ Bank: Bank ID 1 – 3
S Example: MOBANK | 1
• Query format: MOBANK?
