16 DX-700 • User’s Guide • Rev 02
NK==fåíêçÇìÅíáçå
About the DX-700
^Äçìí=íÜÉ=auJTMM
The following topics are discussed in this section:
• Overview
• Basic Features
• New Features
• Theory of Operation
• Understanding Banks
• Grouping Outputs
• DX-700 Stacking
• DX-700 Scaling
• DX-700 Video Processing Delay
• DX-700 Input Identification
• DX-700 Input Switching
• Firmware Upgrades
• Application Questions
lîÉêîáÉï
The DX-700 is a multi-window video processor designed as a versatile front-end to all
Barco LED products.
• Current LED products such as MiPIX, MiTRIX, MiSTRIP, DLite, OLite, SLite and
ILite are supported via the DVI LED interface on the DVI output module.
• Next generation LED products such as NX-4 are supported via the NNI LED
interface on the DX-700’s NNI output module.
Image processing and LED wall configuration and control functions are adjusted from the
DX-700 front panel, or from Barco’s Director Toolset. Refer to the “Basic Features
”
section on page 17 for additional details.
Please note:
• To ensure trouble-free installation and operation of your DX-700, please follow all
procedures in the following two sections:
~ Chapter 3, “Installation” on page 61.
~ Chapter 4, “Operation” on page 69.
• Should you have any questions regarding the installation or operation of the
DX-700, please consult with the factory. Refer to Appendix C, “Contact
Information” on page 203 for contact details.
Important
Director Toolset version 2.0 or later is required.
