Filter
Top Products
2. Changes in wash temperature
and / or temperature holding
time at "Main wash" (except
SPECIAL 93°C-10’ and "Final
rinse")
Any changes to the wash
temperature and/or the temperature
holding time should be recorded in
the appropriate section of the
"Program guide".
The factory setting of the cleaning and
final rinse temperature with temperature
holding time can be seen in the
"Program guide".
The cleaning and final rinse
temperature can be changed from 30
°C - 93 °C and 30 °C - 70 °C (programs
"Standard" and "Universal"),
respectively. The temperature holding
time can be changed from 1 to 15
minutes.
^
Turn the program selector to "STOP"
f.
^
Turn the machine off.
^
Press and hold "Display" ß and
"Start" 6. At the same time, turn the
lab washer on with the "On/Off"
button.
The displays shows the current
program status "P...".
The "Fill/Drain" indicator will
illuminate.
Programming special functions
38