Filter
Top Products
Rinse aid is not used in laboratory
glassware cleaning applications.
If rinse aid is required, the rinse aid
dosage must be activated with
assistance from Miele Technical
Service.
Rinse aid (e.g. Mielclear) is filled in the
storage container and dispensed
automatically. The storage reservoir
holds about 180 ml.
,
Inadvertently filling the storage
reservoir with detergent will damage
the reservoir. Be sure only to use
rinse aid in the reservoir.
^
If the "Add Rinse aid" indicator
illuminates, the rinse aid storage
container needs to be refilled.
The storage container has a level
indicator on the interior of the door.
^
Open the door.
^
Unscrew the cap.
^
Pour rinse aid into the storage
container until the level indicator is
dark (see arrow in the illustration).
Use a funnel if necessary.
^
Replace and tighten the cap. Clean
up any spilled rinse aid to prevent
oversudsing in the next wash.
^
Wait until the "Rinse" indicator on the
control panel illuminates before
adding any more rinse aid.
Adding rinse aid
17