Filter
Top Products
1.1.2 Priming the detergent system
a) If the dosage concentration is set:
^
Turn the program selector to
"Custom". "do1" appears in the
display.
^
Press the "Display" ß button.
The dosage system will be primed
automatically. The priming is done if
the display shows "0".
To store the settings:
^
Press the "Start" 6 button. "SP"
appears in the display.
^ Press the "Start" 6 button again. The
change has been saved.
b) If the system is primed only (e.g.
because the dosage system was
completely empty):
^
Select programming level "E02"
(see "Accessing the programming
level").
^
Turn the program selector to
"Custom".
"do1" appears in the display.
^
Press the "Display" ß button.
The dosage system will be primed
automatically. The priming is
complete if the display shows "0".
^ Turn the machine off with the "On/Off"
button.
When the dispensing system is
primed, always:
^ Run the "Rinse" program afterwards
to remove any detergent or
neutralizer residues in the wash
chamber.
Programming special functions
36