Filter
Top Products
Important:
Make sure that the spring adapter for
the water connection engages correctly
when a basket or injector unit is
inserted into the machine. It must be
4 - 5 mm higher than the water
connection inlet in the machine. If this is
not the case, adjust the adapter by
performing the following steps:
^
Loosen the locking ring.
^
Push up the adapter 4 - 5 mm and
tighten the locking ring.
Select baskets and inserts which are
appropriate for the application.
Please contact Miele’s application
specialist for advice:
1-800-991-9380
Loading
25