Filter
Top Products
Settings
97
Suds cooling
When this is activated, additional wa‐
t
er flows into the drum at the end of
the main wash to cool the suds down.
Hot suds can damage plastic drainage
pipes.
Suds cooling takes place when a tem‐
perature of 70°C or higher is selected
for the Cottons programme.
Suds cooling should be activated:
– to prevent the danger of scalding if
the dr
ain hose is hooked over the
edge of a sink or basin.
– where drainage pipes do not comply
with DIN 1986.
Factory default setting: Suds cooling is
switched off.
Anti-crease
The anti-crease function helps prevent
cr
easing if laundry is not going to be
removed immediately after the end of
the programme.
The drum continues to turn at intervals
for up t
o 30 minutes at the end of the
programme. The door can be opened at
any time.
Factory default setting: anti-crease is
switched on.