Filter
Top Products
Problem solving guide
70
General problems with the washing machine
Problem Cause and remedy
At the end of the pro‐
gr
amme there is still liq‐
uid in the capsule.
The small pipe in the detergent dispenser drawer onto
whic
h the capsule is placed is blocked.
Clean the small pipe.
This is not a fault.
F
or technical reasons a small amount of water will re‐
main in the capsule.
There is water next to
the capsule in the fabric
con
ditioner compart‐
ment.
The C
ap sensor was not activated or an empty
capsule was not removed at the end of the last pro‐
gramme.
Make sure that you remember to activate the Cap
sensor the next time you insert a capsule.
Remove and then dispose of the empty capsule at
the end of each pr
ogramme.
The small pipe in the detergent dispenser drawer onto
which the capsul
e is placed is blocked.
Clean the small pipe.
The display is in a dif‐
fer
ent language.
A different language has been selected in "Settings,
Language ".
Set the language you want. The flag symbol will
guide you.