Filter
Top Products
Problem solving guide
65
The following fault messages appear in the display and the
pr
ogramme stops
Problem Cause and remedy
Water intake See
The water inlet is blocked or restricted.
C
heck whether the stopcock is opened properly.
C
heck whether the inlet hose is kinked.
C
heck whether the water pressure is too low.
The filter in the water inlet is blocked.
Clean
the filter.
Drainage See
The water outlet is blocked or restricted.
The drain hose has been fixed too high.
C
lean the drain filters and the drain pumps.
T
he maximum delivery head is 1 m.
Service Water-
proof
The water protection system has reacted.
Cl
ose the stopcock.
C
all the Service Department.
Service Fault F
There is a fault.
S
tart the programme again.
If the fault message appears again, contact the
Service Department.
To switch off the fault messages: Switch the washing machine off with the but‐
t
on.